It’s as simple as learning how to spray paint shoes to change the color of your shoes without using dye. Spray paint made exclusively for leather shoes is a simple and affordable technique to modify the color of leather and synthetic shoes.
Let’s have a look at some of the major issues. We’ll show you how to choose the right ingredients, how to prepare, and, of course, how to spray paint shoes.
Which is the best spray paint for shoes?
Choosing the correct tools for the job is critical to any project’s success. It’s not a good idea to paint leather with a fabric-safe product or vice versa. If you use the wrong type of paint, it will either not adhere or may crack and peel after drying.
Many leather, vinyl, and plastic paints are available in aerosol cans for easier application. Spray paint from Moneysworth and Best Brillo is a good choice. There are 52 different hues to pick from.
Nu-Life from Meltonian is another option, albeit there aren’t as many color options.
Other paints, such as this set from Angelus, are available. The benefit is that you can mix colors to achieve the precise tint you like. The disadvantage is that you’d have to purchase a spray gun to put it to your shoes.
A set of paints like these from U.S. Art Supply will work for painting fabric shoes. To make your life easier, they even supply a color mixing chart. To apply these paints, you’ll need a spray gun once again.
The bottom line is that you must select the appropriate paint. Check to see if the manufacturer recommends it for your shoe’s material.
What you will need to spray paint for shoes
- Shoe brush.
- Leather preparer/deglazer or 100 percent acetone.
- Old large tablecloth or sheet.
- Cotton wool balls or a clean rag.
- Fine grade sandpaper.
- Warm water.
- Dishwashing soap.
- Scouring pad.
- Painters tape.
How to Spray Paint Shoes – 4 Steps
- If you take the time to prepare your shoes for painting, whether new or used, the color will appear better and last longer.
- Remove the waxy finish, dirt, and oils from the shoe with the deglazer, preparation, or acetone. Apply with a cotton pad, ball, or cloth and rub vigorously until the sheen is gone and the shoes are dull.
- Make sure the leather doesn’t have any cotton fibers adhered to it. Allow around 15 minutes for the deglazer to evaporate.
Spray painting is a labor-intensive process. Rushing will only result in cracked or flaking paint on your shoes.
- To make a flat surface, stuff the toes of your shoes with newspaper or plastic bags.
- Mask off any places you don’t wish to paint with masking tape.
- Lightly spray paint in a long, smooth sweeping motion.
- A few thin coatings will last longer than a few thick coats.
- Allow 1 hour for each coat to dry between applications.
- Allow 1 hour for the final application to dry before removing the masking tape and allowing the paint to set for 24 hours.
Finishes serve two objectives, even if they aren’t essential. They provide protection for your paint job while also giving your shoes a matte (non-shiny) or glossy (shiny) finish. Always apply many light coats to any surface, letting each to dry between applications.
- To produce a smooth surface when painting delicate or soft shoes, pack the toes with newspaper or plastic bags.
- Use a “base coat” in a similar but non-metallic hue if you’re painting with metallic colors. This will give the metallic coat a more even surface.
- If you’re painting your shoes in more than one color, start with the lighter one and work your way up to the darker one. (It’s easier to cover up a mistake by painting dark over bright than than vice versa.)
- When painting, avoid using wool daubers. Not for painting, rather for adding dye or polish.
FREQUENTLY ASKED QUESTIONS
1. Can I spray paint leather and canvas shoes?
Yes, you certainly can. Simply ensure that the material is properly prepared before painting. If both materials are in the same shoe, prepare them separately using the techniques outlined above.
Fabric paint or markers can also be used to color canvas shoes. You might want to have a look at this collection from U.S. Art Supply. If you’re feeling very inventive, you can create a variety of patterns to customise your shoes.
2. How do you seal leather shoes after painting?
After your shoes have been painted and dried, use a spray acrylic sealant to protect your work. Depending on your taste, they come in matte or glossy finishes. Aleene’s bundle allows you to choose between the two.
Apply multiple thin coats, as you would with spray paint, and allow each coat to dry completely between applications.
3. Can you use more than one type of paint to personalise shoes?
Yes, you certainly can. The world is your oyster when it comes to creativity. To make your creations, you can use a marker, a brush, and spray paint. When spraying, make sure to cover any places you don’t want to be colored by the spray with painters tape.
A fascinating design on a pair of Nike sneakers is shown in this video.
4. Time to get artistic
An old favorite pair of shoes can be given a new lease on life by spray painting them. It can also help you match the color of your shoes to your clothing.
If you’re looking for a unique shade, this is an excellent option. Perhaps you’re preparing for a particular occasion and want to stand out.
Now that you’ve learned everything there is to know how to spray paint for shoes, it’s time to get creative. Please leave a remark or send us a photo of your freshly refurbished shoes. Shoestorenyc.com ‘d love to hear from you and see the outcomes, so don’t be shy about sharing.